10m Oil Gauging Tape

• Model: SISCO-OGT-10
• Length: 10m
• Tape Material: stainless steel
• Anchor Head Material: Brass
• Anchor Head Diameter: 20mm
• Dipstick Length: 290mm
• Weight: 730g

Q1: What is oil gauging tape?
A1: An oil gauging tape is a measuring tool that is used to determine the depth of oil in storage tanks, drums, or other containers. It is typically made of a long, flexible steel ribbon or tape, marked with precise measurements at regular intervals.

Q2: What are the components of oil gauging tape?
A2: The oil gauging tape consists of handle, tape frame, crank, measuring tape, brass drawing weight, oil wiper, bracket and connector.

Q3: Can a oil gauging tape be wrong?
A3: Over time, the numbers on a tape will fade, and the tape itself can bend, rust, get tangled, or even break. Other abuse, such as being dropped on the shop floor or being snapped into the housing at full speed one time too many can cause measurement inaccuracies.

Tips: How to read oil gauging tape?

• Hold the tape. Start by gripping the tape handle firmly with one hand and extending the tape down into the liquid being measured. Make sure the tape is fully immersed in the liquid, and the tape handle is kept above the liquid surface.
• Observe the tape. Look for markings on the tape that indicate the measurements. Oil gauging tapes typically have markings in feet, inches, or centimeters, depending on the unit of measurement being used. The markings may be stamped or printed on the tape and are usually labeled at regular intervals.
• Read the measurement. Locate the point where the tape emerges from the liquid, and look for the nearest marking on the tape below the liquid surface. This will indicate the measurement of the liquid level.

Thank you for buying industrial test and measurement equipment on sisco.com, all products sold by sisco and the partner cover a 12 months warranty, effective from the date of receiving the products.

What is covered?

sisco is responsible for providing free spare parts, and free technical support to assist the customer to repair the defective products until the problem is solved.

What is not covered?

• Product purchased from anyone other than a sisco store or a sisco authorized reseller.
• Expendable parts.
• Routine cleaning or normal cosmetic and mechanical wear.
• Damage from misuse, abuse or neglect.
• Damage from use of parts other than sisco approved.
• Damage from use outside the product’s usage or storage parameters.
• Damage from use of parts not sold by sisco.
• Damage from modification or incorporation into other products.
• Damage from repair or replacement of warranted parts by a service provider other than a sisco authorized service provider.
• Damage caused by the application environment not meeting the product usage requirements and the failure to perform preventive maintenance.