Overview
SISCO storage oscilloscope with 300 MHz bandwidth, 2.5 GSa/s sampling rate, 8 inches color LCD screen, bright color, and high contrast. You can adjust the screen brightness and background grid brightness according to your needs.
Digital storage oscilloscope interface details
- 8-inch high-resolution LCD
- Vertical control area
- Function key area
- Trigger area
- Horizontal control area
- Function selection button
Support SCPI
- Trigger output or pass/fail output port
- Stowable handle
- Switch
- Main power switch
- Power socket
- Optimized cooling holes
- Ground port
- Tripod (adjustable oscilloscope tilt angle)
Dimension Unit (mm)

Application
The main application of a SISCO oscilloscope is used to display the waveforms of signals. It can be used in many fields such as automotive test, signal analysis, electrical, transducer test and measurement, electrical equipment design, medical equipment testing field, etc.

FAQs
Q1: Can an oscilloscope measure DC voltage?
A1: DC voltage can be measured using either an oscilloscope or a digital multimeter. Each piece of testing equipment has its advantages and disadvantages.
Q2: What is the maximum frequency for the oscilloscope?
A2: System bandwidth determines an oscilloscope's fundamental ability to measure an analog signal - the maximum frequency range that it can accurately measure. Entry-level scopes will often have a maximum bandwidth of 100 MHz. They can accurately (within 2%) show the amplitudes of sine-wave signals up to 20 MHz.
Q3: What is the record length for an oscilloscope?
A3: The record length, measured in points or samples, divided by the sample rate (in Samples/second) specifies the total time (in seconds) that is acquired. Example: With a record length of 1 M points and a sample rate of 250 MSa/sec, the oscilloscope will capture a signal of 4 msec in length.
Tips: How to maintain a digital storage oscilloscope?
- Do not store or place the instrument in a location where the LCD will be exposed to direct sunlight for an extended period of time.
- Do not allow sprays, liquids and solvents to get on the instrument or probe as this may damage the instrument or probe.
- Using a soft cloth to wipe the dust from the outside of the instrument and the probe. When cleaning the LCD screen, be careful not to scratch the transparent LCD protective screen.
- Wiping the instrument with a soft cloth that is damp but does not drip, taking care to disconnect the power. A soft detergent or water can be used to scrub. Do not use any abrasive chemical cleaners as they may damage the instrument or the probe.
Warranty
Thank you for buying industrial test and measurement equipment on sisco.com, all products sold by sisco and the partner cover a 12 months warranty, effective from the date of receiving the products.
What is covered?
sisco is responsible for providing free spare parts, and free technical support to assist the customer to repair the defective products until the problem is solved.
What is not covered?
- Product purchased from anyone other than a sisco store or a sisco authorized reseller.
- Expendable parts.
- Routine cleaning or normal cosmetic and mechanical wear.
- Damage from misuse, abuse or neglect.
- Damage from use of parts other than sisco approved.
- Damage from use outside the product’s usage or storage parameters.
- Damage from use of parts not sold by sisco.
- Damage from modification or incorporation into other products.
- Damage from repair or replacement of warranted parts by a service provider other than a sisco authorized service provider.
- Damage caused by the application environment not meeting the product usage requirements and the failure to perform preventive maintenance.