The nitrogen Oxides (NOX) detector features a lightweight, ergonomic design with a high-contrast LCD, intuitive controls, and real-time data logging. Whether you're conducting low-level ambient air monitoring or high-concentration NOX gas leak detection, this device delivers reliable and accurate measurements every time.
NOX gas detector with dual unit measurement
Customizable alarm system
Nitrogen Oxides (NOX) gas detectors are widely used in industrial emissions monitoring, vehicle exhaust testing, ambient air quality control, and laboratory gas analysis to detect harmful NO and NOâ‚‚ gases for safety and regulatory compliance.
Â
Model | GD200-NOX |
Sampling Method | Pumping suction, flow rate can be up to 750ml/min |
Detection Principle | Electrochemistry |
Gas | Nitrogen Oxides NOX |
Range (Optional) * | 0-1ppm, 0-5ppm, 0-10ppm, 0-20ppm, 0-50ppm, 0-100ppm, 0-250ppm, 0-500ppm, 0-1000ppm |
Resolution | 0.001ppm (0-1/5/10ppm), 0.01ppm (0-20/50ppm), 0.1ppm (0-100/250ppm), 1ppm (0-500/1000ppm) |
Accuracy | ≤±3% F.S. |
Response Time | ≤10s |
Repeatability | ≤±1% |
Recovery Time | ≤10s |
Linearity Error | ≤±1% |
Zero Shift | ≤±1% (F.S./year) |
Data Logging (Optional Function) | High speed data transmission by USB, available for data downloading and printing (The built-in IC card has about 2G memory, which can record 100,000 sets of data.) |
Alarms | Sound, light and vibration |
Display | LCD dot matrix display |
Language | Chinese/English |
Battery | 3.7V rechargeable lithium battery, 3.7 Watt (Charger included: Input AC 100-240V 50/60Hz with optional USA, Europe or UK plug) |
Operating Time | 100h (Pump off) |
Communication | Mini USB interface supports standard MODBUS communication protocol |
Explosion-proof Grade | â…¡ 2G Ex ia â…¡ CT4 Ga |
Case Material | ABS+PC |
Protection Grade | IP66 |
Certification | CE, ATEX (Standard: EN IEC 60079-0:2018, EN 60079-1:2014) |
Operating Temperature | -20℃~50℃ |
Operating Humidity | 0~95%RH (non-condensing) |
Operating Pressure | 0.8~1.2bar |
Dimension | 205*75*32mm |
Weight | 300g |
Warranty | 12 months |
Extension Probe | About 480mm (Total Length), About 300mm (Probe Head) |
Accessories (Optional) | Calibration kit - gas pressure regulator (calibration gas cylinder NOT included)
|
Q1:Â What is a gas detector?
A1:Â A gas detector is an instrument for gas leakage concentration detection, including a portable gas detector, handheld gas detector, fixed gas detector, online gas detector, etc.
Q2:Â What does a gas detector detect?
A2:Â Combustible gases: Natural gas (methane), liquefied gas, coal gas (hydrogen), acetylene, pentane, alkynes, acetone, toluene, alcohols, hydrocarbons, light oil, etc.
Toxic gases: Carbon monoxide, hydrogen sulfide, ammonia, chlorine, oxygen, phosphine, sulfur dioxide, hydrogen chloride, chlorine dioxide and other toxic and harmful gases.
Q3:Â What is ppm of gas detector?
A3:Â Parts per million or "ppm" is often used as a fractional measure of concentration. For example, a methane (molecular) concentration of 2% means that 2 out of every 100 air molecules are methane. Likewise, a methane concentration of 2 ppm means that 2 out of every 1 million air molecules are methane.
Tips: What gases does the NOx gas detector measure?
A portable NOx gas detector is specifically designed to measure nitrogen oxides, primarily nitrogen monoxide (NO) and nitrogen dioxide (NOâ‚‚). These two gases are the major constituents of NOx emissions, commonly produced by combustion processes such as those in vehicles, industrial facilities, and power plants. Depending on the detector model, the device may include separate sensors for NO and NOâ‚‚, allowing for individual readings as well as a calculated total NOx value. Some advanced detectors may also offer additional gas detection capabilities or data logging features for environmental monitoring and compliance testing. Always refer to the product specifications to confirm the exact gases measured and sensor ranges.
Thank you for buying industrial test and measurement equipment on SISCO.com, all products sold by SISCO and the partner cover a 12 months warranty, effective from the date of receiving the products.
SISCO is responsible for providing free spare parts, and free technical support to assist the customer to repair the defective products until the problem is solved.