SISCO 75W ESD-safe soldering station offers smart chip regulation for consistent performance, fast heat-up, and intelligent sleep mode. Designed with ESD safety and overheat protection, it suits professional electronics assembly and repair. The digital display and 75W power provide precise, reliable soldering every time.
Rapid Heat-Up & High-Efficiency Thermal Recovery
- Reaches operating temperature in under 20 seconds-from a cold start, eliminating idle waiting and boosting daily throughput.
- Thermal recovery time is minimized to <3 seconds after soldering large pads or ground planes, ensuring consistent quality on multi-layer PCBs.
- The transformer's high thermal mass stores reserve energy, preventing temperature droop even during prolonged, continuous soldering sessions.
- Advanced thermal insulation around the heating element reduces heat loss to the handle, directing more energy to the tip for faster work.
- The 75W power output provides ample headroom for lead-free solder alloys that require higher temperatures and faster heat supply.
Ergonomic Design & Hassle-Free Maintenance
- Soft-grip silicone handle with anti-slip texture remains cool to the touch, offering comfort and precise control even during extended repairs.
- Quick-change tip system allows you to swap cartridges in seconds without tools, adapting to different component sizes with minimal interruption.
- Flexible 1.1m silicone cable with superior abrasion resistance withstands repeated twisting and flexing, outlasting ordinary PVC cords.
- Removable dust-proof sponge tray and built-in iron stand keep the work area clean, and the tip is safely docked when not in use.
- Intelligent memory function retains the last set temperature after power-off, so you don’t need to reset it every session – just switch on and go.
Applications
SISCO 75W ESD-safe soldering station is ideal for consumer electronics repair, mobile phone motherboard rework, laptop PCB troubleshooting, and small appliance maintenance. It also excels in DIY projects, hobbyist workshops, and laboratory prototyping. Its precision and safety make it a reliable choice for both professional technicians and electronics enthusiasts.
Electronics Repair
Home Appliance Repair
Laboratories
Laptop Repair
| Model | SISCO-SS-CSD-969D |
| Input Voltage | 220V AC, 50/60Hz |
| Power Consumption | 75W |
| Temperature Range | 200°C – 480°C |
| Temperature Accuracy | ±1°C (PID controlled) |
| Display | Backlit LCD (set temp + actual tip temp) |
| Heating Element | High-density ceramic core |
| Heat-up Time | < 20 seconds (from cold start) |
| Thermal Recovery Time | < 3 seconds (after large pad soldering) |
| Transformer | Oversized copper-aluminum transformer |
| ESD Protection | Built-in ESD grounding |
| Leakage Voltage | < 2mV |
| Ground Impedance | < 2Ω |
| Overheat Protection | Automatic power cutoff |
| Sleep Mode | Automatic standby when the iron is docked |
| Temperature Memory | Retains last set temperature after power-off |
| Handle Cable | Silicone-insulated, heat-resistant, 1.1m |
| Power Cord | 3C-certified, copper core, with grounding plug |
| Station Dimensions | 110 × 130 × 80 mm |
| Station Weight | 1.21 kg |
| Handle Weight | 0.88 kg |
Dimension (unit: mm)
Q1: What temperature range does this soldering station support?
A1: 200–480°C with ±1°C PID accuracy. It handles both leaded and lead-free soldering, from tiny SMD chips to large ground planes, ensuring consistent results across various electronics work.
Q2: Is it safe for sensitive electronic components?
A2: Yes. Built-in ESD grounding, leakage below 2 mV, and automatic overheat cutoff protect microchips, PCBs, and delicate circuits from static discharge and thermal damage during extended use.
Q3: Can I use it for smartphone motherboards or SMD rework?
A3: Absolutely. 75W power, rapid heat-up, and precise temperature control make it ideal for phone motherboard repairs, BGA rework, and fine SMD soldering in professional workshops.
Tips: What should I do to keep my soldering station in good condition?
- Tin the tip before and after each use. Coat the tip with a thin layer of fresh solder before starting and again before powering off. This protects the plating from oxidation and significantly extends tip life. A well-tinned tip also ensures better heat transfer and cleaner solder joints.
- Use the lowest effective temperature. Higher temperatures accelerate tip wear. Always use the lowest temperature that allows the solder to flow smoothly. For most electronics work, 300–350°C is sufficient. Reserve higher temperatures for lead-free solder or large ground planes to reduce unnecessary stress on the tip.
- Clean the tip gently and frequently. Use a damp sponge or brass wool to wipe away excess solder and oxidation. Avoid aggressive scraping or using abrasive materials that can damage the iron plating. Clean the tip frequently during use to maintain optimal wetting and prevent contamination.
- Replace the tip when worn. A tip with pitting, holes, or an irregular shape will not transfer heat properly and can damage components. Keep a selection of 900 series tips on hand and replace them as soon as signs of wear appear. Proper care will extend tip life, but all tips will eventually need to be replaced with regular use.
Thank you for buying industrial test and measurement equipment on SISCO.com, all products sold by SISCO and the partner cover a 12 months warranty, effective from the date of receiving the products.
What is covered?
SISCO is responsible for providing free spare parts, and free technical support to assist the customer to repair the defective products until the problem is solved.
What is not covered?
- Product purchased from anyone other than a SISCO store or a SISCO authorized reseller.
- Expendable parts.
- Routine cleaning or normal cosmetic and mechanical wear.
- Damage from misuse, abuse or neglect.
- Damage from use of parts other than SISCO approved.
- Damage from use outside the product’s usage or storage parameters.
- Damage from use of parts not sold by SISCO.
- Damage from modification or incorporation into other products.
- Damage from repair or replacement of warranted parts by a service provider other than a SISCO authorized service provider.
- Damage caused by the application environment not meeting the product usage requirements and the failure to perform preventive maintenance.
Shop on sisco.com for all of your industrial test and measurement equipment & accessories including portable detectors, meters, testers, scales, etc.
