SISCO brake fluid liquid tester pen with detection range of 0%-4%, built with a durable ABS housing, the tester pen is impact-resistant, rust-free, and designed to withstand everyday use in garages or workshops. Its lightweight, ergonomic design makes it easy to handle, while the quick-response probe provides fast readings in just seconds.
High-Sensitivity Quick-Response Probe Ensures Accurate and Stable Detection
- High-Sensitivity Probe: Equipped with advanced sensors, the probe quickly detects moisture levels in brake fluid, providing fast and reliable results.
- Accurate Measurements: The sensitive probe ensures precise readings even when water content is minimal, reducing false alarms or errors.
Quick Response: Provides almost instantaneous feedback, allowing multiple vehicles or samples to be tested efficiently. - Durable Construction: The probe is designed to withstand repeated use and exposure to brake fluid without degradation, ensuring long-lasting performance.
- User-Friendly: Easy to operate with a simple dip-and-read method, making it convenient for both professional mechanics and car owners.
Dual-color Backlit Screen Prompts, Quick Reading of Results
- Dual-Color Backlight Display: Clear green and red backlight indicators make it easy to understand the test results at a glance.
- Instant Status Feedback: Green backlight shows the brake fluid is safe, while red indicates high moisture levels and the need for replacement.
- Easy to Read in Any Light: Bright dual-color illumination ensures visibility in dark garages, low-light conditions, or under direct sunlight.
- User-Friendly Operation: The color-coded warning system eliminates guesswork, making it simple for both professionals and DIY users to interpret results.
- Enhanced Safety Assurance: Quick and clear moisture detection helps drivers replace brake fluid on time, ensuring reliable braking performance.
Dimension
Applications
SISCO brake fluid tester is widely used in automotive workshops, inspection stations, fleet maintenance, and by car owners for routine vehicle care. It quickly detects moisture content or boiling point changes in brake fluid, helping ensure reliable braking performance and compliance with DOT standards (DOT 3, DOT 4, DOT 5.1). This makes it an essential tool for mechanics, inspectors, and drivers to maintain safety and prevent brake failure.
Inspection Stations
Fleet Maintenance
Automotive Workshops
Routine Vehicle Care
Â
| Model | SISCO-BFT-XC66 |
| Extension Tube | 220mm |
| Display | High-definition LCD display |
| Detection Range | 0%-4% |
| Error | 0.30% |
| Detection Type | DOT3, DOT4, DOT5.1 |
| Alarm Method | 0-2%: green backlight; 2%-4%: sound and light alarm |
| Data Retention | √ |
| Operating Temperature | 0~40°C |
| Dimensions | 380*28*28mm |
| Weight | 100g |
Q1: What is a brake fluid tester?
A1: A brake fluid tester is a tool used to check the condition of brake fluid in a vehicle. It measures factors like water content or boiling point, since moisture in brake fluid lowers its effectiveness and can lead to brake failure. By providing a quick pass/fail or percentage reading, it helps determine whether the brake fluid is safe to use or needs to be replaced.
Q2: What types of brake fluid can a brake fluid tester test?
A2: Most brake fluid testers are designed to test glycol-based fluids, including DOT 3, DOT 4, and DOT 5.1. These are the most common types used in passenger cars and light trucks. They are not suitable for DOT 5 silicone-based brake fluid, which requires different testing methods.
Q3: How does a brake fluid tester work?
A3: A common brake fluid tester works by submerging its electrodes into the brake fluid, then measuring the electrical conductivity of the fluid. Because brake fluid naturally absorbs water over time, this water increases its conductivity. The tester uses a traffic light system of LEDs to indicate the percentage of water content and the overall condition of the fluid, with green meaning no water and red indicating a high level of moisture that requires a brake fluid flush.
Tips: Why should I use a tester pen instead of test strips?
You should use a brake fluid tester pen instead of test strips because it offers greater accuracy, convenience, and long-term value. Test strips are single-use, meaning you need to buy new ones each time you want to check your brake fluid, and their results can sometimes be difficult to interpret due to subtle color changes. In contrast, a tester pen is fully reusable, allowing you to perform unlimited tests on multiple vehicles without additional cost.
The tester pen also provides faster and clearer results. With the press of a button, the built-in sensors immediately measure the water content in the brake fluid and display the outcome using LED indicators or a digital screen. This eliminates the guesswork involved in comparing strip colors under different lighting conditions.
Thank you for buying industrial test and measurement equipment on SISCO.com, all products sold by SISCO and the partner cover a 12 months warranty, effective from the date of receiving the products.
What is covered?
SISCO is responsible for providing free spare parts, and free technical support to assist the customer to repair the defective products until the problem is solved.
What is not covered?
- Product purchased from anyone other than a SISCO store or a SISCO authorized reseller.
- Expendable parts.
- Routine cleaning or normal cosmetic and mechanical wear.
- Damage from misuse, abuse or neglect.
- Damage from use of parts other than SISCO approved.
- Damage from use outside the product’s usage or storage parameters.
- Damage from use of parts not sold by SISCO.
- Damage from modification or incorporation into other products.
- Damage from repair or replacement of warranted parts by a service provider other than a SISCO authorized service provider.
- Damage caused by the application environment not meeting the product usage requirements and the failure to perform preventive maintenance.
Shop on sisco.com for all of your industrial test and measurement equipment & accessories including portable detectors, meters, testers, scales, etc.
