Blog

UV meters are important tools used to measure the intensity of UV radiation and are widely used in scientific research, industrial production, environmental monitoring and health care. In order to ensure the accuracy and reliability of the measurement data, regular calibration of the UV meter is essential, SISCO online shopping center provides you with detailed calibration methods for UV meters.

Transistor tester is electronic instruments, which based on general electronic measuring instruments and measuring semiconductor devices. It can be used to test the input and output characteristics of the common emitter and common base circuits of transistor (NPN and PNP); Test various reverse saturation currents and breakdown voltages, and also measure various parameters of devices such as field-effect transistors, voltage regulators, diodes, single junction transistors, thyristors, etc. This blog will specifically introduce how to use a transistor tester on a multimeter.

A phase rotator is a precision instrument specially used for analyzing and measuring the phase of signals. It can rotate the phase of the signal in different applications to meet specific technical requirements. This is very important to ensure the correct timing and synchronization of the signal, especially in communications, control systems and measurement equipment. In addition, the phase rotator can also be used to test and calibrate motors and phase rotation to ensure the correct operation of the equipment and avoid failures.

Electronic loads are indispensable tools for anyone involved in the design, development, or testing of power electronics. Whether you are working with power supplies, batteries, or solar panels, an electronic load provides the flexibility to simulate a wide range of real-world conditions. From 300W loads for small-scale electronics to 1000W or even 1500W loads for industrial applications, there’s an electronic load available for nearly every testing scenario. With the ability to operate in different modes such as constant current, voltage, resistance, and power, these instruments provide the accuracy and control necessary to ensure that power systems perform as expected.

A dew point meter is a precision instrument used to measure the moisture content in a gas. It determines the moisture content by measuring the dew point temperature in the air. The dew point temperature refers to the temperature at which the gaseous water in the air needs to drop to reach saturation and condense into liquid water under a fixed air pressure. It is an important indicator for measuring the humidity level of the air and is the balance point between the water vapor saturation and temperature in the air. The dew point temperature is not only important in weather forecasting but also plays a key role in industrial production, agriculture, and other fields. Therefore, the dew point meter also has a wide range of applications.

A surface roughness tester is an instrument used to measure the surface roughness of an object. It evaluates the smoothness and roughness of an object's surface by measuring the tiny fluctuations on the surface. Surface roughness testers are widely used in machinery manufacturing, the automotive industry, aerospace, and other fields, and are very important for ensuring product quality and performance. This article will briefly explain its working principle so that users can better understand the surface roughness meter.

A UV meter is a tool for measuring the intensity of ultraviolet light. The working principle of the UV light meter is to use ultraviolet sensors to measure the intensity of ultraviolet light. When using the UV light intensity meter, you need to aim the sensor at the ultraviolet source, and then observe the value on the instrument display to get the measurement result of the ultraviolet intensity.

A conductivity meter is a precision instrument used to measure the conductivity of a solution. Conductivity is an indicator of the ion concentration in a solution. It reflects the ability of a solution to conduct current. It is the most commonly used electrochemical analysis method after measuring pH and is also an important indicator for measuring water quality.

The pipe blockage detector is a professional detection device, which is mainly used to detect the blockage of pipelines, containers, or other closed spaces. The use of the pipe detector can greatly improve the efficiency of pipeline maintenance and repair, and reduce the waste of manpower and material resources.

Infrared thermometer is an instrument that uses infrared radiation energy to measure the temperature of an object. It is mainly composed of an optical system, a detector, a signal processing circuit and a display device. The working principle of an infrared thermometer is mainly based on the thermal radiation characteristics of an object and the relationship between thermal radiation energy and temperature.