The soil sampler kit is a tool used for collecting soil samples, which typically includes a series of accessories to facilitate sampling in different types of soil. The electric soil sampler kit adopts a detachable design for easy installation and storage. It is made of stainless steel material, it has no pollution to the sample, and it reduces labor intensity.
Powerful electric drive, easy sampling
- The electric soil sampler kit is equipped with a high-performance motor to drive the sampling auger or probe smoothly into various soil types.
- It allows for precise control over sampling depth, typically up to 60 cm or more, depending on the model.
- The electric soil sampler kit comes with multiple probe sizes and types (e.g., auger, split-spoon, core sampler) to accommodate different sampling needs.
High efficiency, adaptability
- The electric soil sampler kit is lightweight and compact for easy transportation and field use; it often includes a durable carry case.
- It is rechargeable lithium batteries that ensure cordless operation and are an ideal choice for remote field work.
- The electric soil sampler kit is built with corrosion-resistant stainless steel and heavy-duty components to withstand harsh environments.
Applications
A soil sampler is widely used in agriculture, environmental monitoring, and geotechnical analysis. It is ideal for sampling in wetlands, tidal flats, and can collect soils such as marsh, peat, and sediment. The sampler helps assess soil health, nutrient levels, and pH in agriculture, detects contamination in environmental studies, and evaluates soil stability in construction projects. It also supports research, land reclamation, and conservation by providing insights into soil quality and promoting sustainable land management.
River
Peat Soil
Lake
Tidal Flat
Â
| Model | SISCO-SS-JCRTTC20Â |
| Voltage | 220V |
| Power | 3.6KW |
| Ignition Method | Switch type |
| Energy Consumption | Low energy consumption |
| Impact Frequency | 2600/M |
| Impact Energy | 60J~79J |
| Core Depth | 0-10M |
| Drill Rod | Inner and outer diameter not less than 38mm/50mm; Length not less than 1.00 meters per piece, using threaded connections, easy to assemble and disassemble |
| Drill Bit | Take one hard soil drill bit and one standard soil drill bit each |
| Sample Tube | Inner and outer diameters not less than 34mm/35mm; The length shall not be less than 1.00 meters per piece; Equipped with gaskets |
| Pulling Device | Fast pulling, with a speed of not less than 3.00 meters per minute, adopting a more reasonable ergonomic design, which can be pressed by hand or stepped on by foot |
Q1: What is the electric soil sampler kit?
A1: The electric soil sampler kit is a device that uses an electric drive for soil sampling, suitable for fields such as agriculture, geological surveys, and environmental monitoring, to efficiently and accurately obtain soil samples.
Q2: What type of electric soil sampler is this device suitable for?
A2: This sampler is suitable for most types of soil, including soft soil, loam, sandy soil, and mild clay. For hard or rocky formations, it is recommended to use stronger drill bits or perform surface pre-treatment first.
Q3: What are the advantages of the electric soil sampler kit?
A3: The electric soil sampler kit is a portable on-site sampling device with a more reasonable ergonomic design, which can be pressed by hand or foot.
- The electric soil sampler can improve sampling efficiency and save manual labor.
- The sampling depth of the electric soil sampler is more stable and consistent.
- It reduces human error and improves sample representativeness.
- It is suitable for long-term, batch sampling tasks.
Tips: How to operate the electric soil sampler kit?
- Assembly equipment: If the electric soil sampler kit is equipped with extension rods or drill bits of different sizes, select and install as needed.
- Insert device: Align the electric sampler vertically with the ground. Turn on the power switch (or press the start button), and the drill bit begins to rotate and slowly enter the soil.
- Sampling depth control: Generally set at standard levels such as 0-15cm and 15-30cm.
- Extract samples: Stop drilling and turn off the power after reaching the target depth. Be careful to pull the device out of the soil.
- Cleaning and Recording: Clean the drill bit and sampling tube after each sampling point to avoid cross-contamination. Record sampling point information (location, depth, time, number, etc.).
Thank you for buying industrial test and measurement equipment on SISCO.com, all products sold by SISCO and the partner cover a 12 months warranty, effective from the date of receiving the products.
What is covered?
SISCO is responsible for providing free spare parts, and free technical support to assist the customer to repair the defective products until the problem is solved.
What is not covered?
- Product purchased from anyone other than a SISCO store or a SISCO authorized reseller.
- Expendable parts.
- Routine cleaning or normal cosmetic and mechanical wear.
- Damage from misuse, abuse or neglect.
- Damage from use of parts other than SISCO approved.
- Damage from use outside the product’s usage or storage parameters.
- Damage from use of parts not sold by SISCO.
- Damage from modification or incorporation into other products.
- Damage from repair or replacement of warranted parts by a service provider other than a SISCO authorized service provider.
- Damage caused by the application environment not meeting the product usage requirements and the failure to perform preventive maintenance.
Shop on sisco.com for all of your industrial test and measurement equipment & accessories including portable detectors, meters, testers, scales, etc.
