Sampler Machine for Soil Heavy Metals Kit

Packing list

• 1*Stainless steel sampling tube
• 2*Engineering plastic cutting heads
• 1*Sampling tube holder
• 20*PVC liners
• 2*Stainless steel cutting heads
• 1*Sampling tube holder
• 1*Heart-shaped loam drill bit
• 1*Extension rod: 100cm
• 1*Extension rod: 50cm
• 1*T-shaped handle
• 1*Striking handle
• 1*Energy-absorbing hammer
• 1*Bamboo knife
• 1*Bamboo shovel
• 1*Wrenches
• 1*Meter steel tape measure: 3m
• 1*Scraper
• 1*Gloves
• 1*Aluminum box packaging

Q1: What types of soil is the sampler machine for the soil heavy metals suitable for?
A1: This instrument is suitable for most types of soil, such as clay, loam, sandy soil, etc. For particularly hard or rocky soils, it is recommended to use pre-drilling or impact equipment to ensure sampling depth and integrity.

Q2: Will metal contamination be introduced during the sampling process of the sampler machine for soil heavy metals?
A2: Can't.The soil contact part in the kit is usually made of stainless steel or PTFE coating material, which meets environmental protection and heavy metal detection standards, avoiding sample cross-contamination and metal interference.

Q3: Does the sampler machine for the soil heavy metals support portable on-site operation?
A3: Yes. The sampling machine is designed as a portable or modular structure, with moderate weight, making it convenient for single or double people to carry it to the field for operation. It is suitable for rapid sampling and preliminary analysis on-site.

Tips: How to use the sampler machine for the soil heavy metals correctly?

Understand the sampler machine for the soil heavy metals, read the user manual provided by the manufacturer, and confirm the structure and accessories of the sampler (such as sampling head, extension rod, handle, sample container, etc.). Before preparing for sampling, the following tools need to be prepared:

• Soil Sampler Machine
• Clean sampling bags/bottles (anti-pollution)
• Alcohol or deionized water (for cleaning tools)
• Label paper and pen (marking samples)
• GPS or map (recording the location of sampling points)
• Personal protective equipment (gloves, masks)

Thank you for buying industrial test and measurement equipment on SISCO.com, all products sold by SISCO and the partner cover a 12 months warranty, effective from the date of receiving the products.

What is covered?

SISCO is responsible for providing free spare parts, and free technical support to assist the customer to repair the defective products until the problem is solved.

What is not covered?

• Product purchased from anyone other than a SISCO store or a SISCO authorized reseller.
• Expendable parts.
• Routine cleaning or normal cosmetic and mechanical wear.
• Damage from misuse, abuse or neglect.
• Damage from use of parts other than SISCO approved.
• Damage from use outside the product’s usage or storage parameters.
• Damage from use of parts not sold by SISCO.
• Damage from modification or incorporation into other products.
• Damage from repair or replacement of warranted parts by a service provider other than a SISCO authorized service provider.
• Damage caused by the application environment not meeting the product usage requirements and the failure to perform preventive maintenance.